Publications

Lal Sharma, S., Kumar Rajpoot, V., Shadab, M. D., & Debbarma, A. (2025). Thermohydraulic performance analysis of reverse flow solar air heater using perforated absorber plate. International Journal of Ambient Energy, 46(1), 2557553. https://doi.org/10.1080/01430750.2025.2557553

Chaurasia, S., Dwivedi, A., Sethi, M., Debbarma, A., & Goel, V. (2025). Experimental investigation on heat transfer and friction factor characteristics for novel hybrid roughness used in solar air heater. Experimental Heat Transfer, 38(3), 271-287. https://doi.org/10.1080/08916152.2024.2329662

Koundal, S., Sharma, S. L., & Debbarma, A. (2025). Battery thermal management systems for electric vehicles: an overview of cooling techniques and performance optimization. Journal of Thermal Analysis and Calorimetry, 150(8), 5855-5882. https://doi.org/10.1007/s10973-025-14170-3 

Sharma, S. L., Singh, S., & Debbarma, A. (2025). Thermohydraulic performance analysis of tube heat exchanger using dual side serrated insert tape having triangular wings. Sādhanā, 50(1), 26. https://doi.org/10.1007/s12046-025-02687-0 

Debbarma, A. (2025). Study of Rewetting Behavior in AHWR Fuel Cluster During Loss of Coolant with Water Jet Impingement. Nuclear Science and Engineering, 199(7), 1213-1230. https://doi.org/10.1080/00295639.2024.2438568

Sharma, S. L., Kishor, K., Bisht, V. S., Debbarma, A., & Gaur, A. (2024). CFD analysis of artificially roughened solar air heater: a comparative study of C-Shape, reverse C-Shape, and reverse R-Shape roughness element. International Journal of Ambient Energy, 45(1), 2331240. https://doi.org/10.1080/01430750.2024.2331240

Sharma, S. L., & Debbarma, A. (2024). Advancement in solar air heater with integrated PCM-based thermal energy storage system. International Journal of Green Energy, 21(14), 3330-3366. https://doi.org/10.1080/15435075.2024.2360475

Sharma, S. L., & Debbarma, A. (2024). Experimental study on thermal performance of reverse flow solar collector for dual heating applications. Environmental Progress & Sustainable Energy, 43(6), e14492. https://doi.org/10.1002/ep.14492 

Sharma, S. L., & Debbarma, A. (2024). Heat transfer analysis and melting behavior of nano composite phase change materials (NCPCMs) in a reverse flow solar air heater. Journal of Energy Storage, 101, 113840. https://doi.org/10.1016/j.est.2024.113840 

Debbarma, A. (2024). Study of Thermal Management of Li‐Ion Batteries with an Encapsulated Phase‐Change Material and Internal Liquid Channels. Energy Technology, 12(5), 2301247. https://doi.org/10.1002/ente.202301247 

Sharma, S. L., & Debbarma, A. (2024). Experimental study of reverse flow solar air heater having perforation and delta wing on absorber plate. Energy Technology, 12(4), 2301246. https://doi.org/10.1002/ente.202301246 

Debbarma, A. (2024). Thermal management system of e-vehicle Li-ion battery modules: A comprehensive review. Journal of Thermal Engineering, 10(6), 1679-1697. https://izlik.org/JA67MN86RS 

Lal Sharma, S., & Debbarma, A. (2024). Numerical investigation of reversed flow solar air heater roughened with Circular-and Triangular-Shaped tubes. Journal of Solar Energy Engineering, 146(2), 021003. https://doi.org/10.1115/1.4063184 

Swapnıl, S., & Debbarma, A. (2021). Surface modification techniques for cooling by impinging jets-a review. Journal of Thermal Engineering, 9(5), 1372-1385. https://doi.org/10.18186/thermal.1377253

Sharma, S. L., Singh, S., Debbarma, A., & Mehra, K. S. (2023). Experimental assessment of thermal performance and fluid flow characteristics of perforated hollow elliptical insert in a tube heat exchanger. Arabian Journal for Science and Engineering, 48(9), 11499-11510. https://doi.org/10.1007/s13369-022-07501-1 

Jasyal, N. K., Sharma, S. L., & Debbarma, A. (2023). Performance analysis of solar air heater using triangular corrugated absorber under jet impingement. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 45(3), 9063-9080. https://doi.org/10.1080/15567036.2023.2230932

Chaurasia, S., Goel, V., & Debbarma, A. (2023). Impact of hybrid roughness geometry on heat transfer augmentation in solar air heater: A review. Solar Energy, 255, 435-459. 10.1016/j.solener.2023.02.052 

Debbarma A (2023) A Comprehensive Study on Rewetting Behavior of Nuclear Fuel Rod Bundles during Loss of Coolant Accident. J Nucl Ene Sci Power Generat Technol 12:1. https://zenodo.org/records/8016100 

Chaudhari, M., Sharma, S. L., & Debbarma, A. (2023). Exergetic performance analysis of solar air heater with inverted L-shape ribs as roughness element. Archives of Thermodynamics, 241-267. 10.24425/ather.2023.147546 

Rautela, M., Sharma, S. L., Bisht, V. S., Debbarma, A., & Bahuguna, R. (2023). Numerical analysis of solar air heater roughened with B-Shape and D-Shape roughness geometry. Journal of Heat and Mass Transfer Research, 10(1), 101-120. 10.22075/jhmtr.2023.30710.1445 

Swapnil, S., & Debbarma, A. (2023). Experimental study of quenching progression on a heated flat dimpled surface with water jet impingement. Journal of Heat and Mass Transfer Research, 10(1), 21-29. 10.22075/jhmtr.2023.29640.1412 

Sharma, S. L., & Debbarma, A. (2022). A review on thermal performance and heat transfer augmentation in solar air heater. International Journal of Sustainable Energy, 41(11), 1973-2019. https://doi.org/10.1080/14786451.2022.2125518

Debbarma, A., & Pandey, K. M. (2018). CFD analysis of rewetting behavior in nuclear fuel rod bundle with change in operating conditions. Kerntechnik, 83(1), 36-49. https://doi.org/10.3139/124.110840 

Debbarma, A., & Pandey, K. M. (2016). CFD analysis of rewetting of a single sector AHWR fuel cluster with changing jet directions. Nuclear Engineering and Design, 308, 51-59. 10.1016/j.nucengdes.2016.08.007 

Debbarma, A., & Pandey, K. M. (2016). Numerical analysis on the effect of flow rates and jet diameter in rewetting vertical nuclear fuel bundle with jet impingements. Annals of Nuclear Energy, 94, 518-529. https://doi.org/10.1016/j.anucene.2016.04.023

Debbarma, A. & Pandey, K. (2016). Influence on rewetting temperature and wetting delay during rewetting rod bundle by various radial jet models. Kerntechnik, 81(1), 50-59. https://doi.org/10.3139/124.110571

Vikram, A., Debbarma, A., & Goel, V. (2026, July). Numerical investigation for melting behavior of encapsulated-PCM in fin-intensified battery thermal management systems. In AIP Conference Proceedings (Vol. 3289, No. 1, p. 030022). AIP Publishing LLC. https://doi.org/10.1063/5.0328959 

Sharma, S. L., & Debbarma, A. (2024). Experimental Study on Double Pass Reverse Flow Solar Air Heater with Delta Wings and Perforation on Absorber Plate. In Proceedings of the 27th National and 5th International ISHMT-ASTFE Heat and Mass Transfer Conference December 14-17, 2023, IIT Patna, Patna-801106, Bihar, India. Begel House Inc.. 10.1615/IHMTC-2023.60 

Kumar, K., & Debbarma, A. (2022, February). Performance investigation of sinusoidal corrugated absorber plate solar air heater. In Journal of Physics: Conference Series (Vol. 2178, No. 1, p. 012014). IOP Publishing. 10.1088/1742-6596/2178/1/012014

Sharma, S. L., & Debbarma, A. (2022). Effect of P-Leg material and resistance ratio on a segmented thermoelectric generator. Materials Today: Proceedings, 66, 1023-1030. 10.1016/j.matpr.2022.04.825 

Dwivedi, H., & Debbarma, A. (2021). NUMERICAL STUDY OF HYDRODYNAMICS AND HEAT TRANSFER CHARACTERISTICS DURING COOLING OF CURVE SURFACE WITH WATER JET IMPINGEMENT. In Proceedings of the 26thNational and 4th International ISHMT-ASTFE Heat and Mass Transfer Conference December 17-20, 2021, IIT Madras, Chennai-600036, Tamil Nadu, India. Begel House Inc.. 10.1615/IHMTC-2021.2510 

Choubey, G., Pandey, K. M., Maji, A., Deshmukhya, T., & Debbarma, A. (2017). Computational investigation of multi-strut injection of hydrogen in a scramjet combustor. Materials Today: Proceedings, 4(2), 2608-2614. 10.1016/j.matpr.2017.02.115 

Debbarma, A., & Pandey, K. M. (2017). CFD analysis of rewetting temperature and wetting delay during emergency cooling of vertical nuclear fuel rod bundle with water jet impingement. Materials Today: Proceedings, 4(2), 4144-4152. 10.1016/j.matpr.2017.02.117 

Sharma, D., Pandey, K. M., Debbarma, A., & Choubey, G. (2017). Numerical Investigation of heat transfer enhancement of SiO2-water based nanofluids in Light water nuclear reactor. Materials Today: Proceedings, 4(9), 10118-10122. https://doi.org/10.1016/j.matpr.2017.06.332 

Debbarma, A., & Pandey, K. M. (2017). CFD Study on Emergency Core Cooling of Hot Vertical Nuclear Fuel Rod Bundle by Jet Impingement. Materials Today: Proceedings, 4(2), 2534-2543. https://doi.org/10.1016/j.matpr.2017.02.107 

Debbarma, A., Pandey, K. M., Sharma, D., & Choubey, G. (2016). CFD analysis of rewetting vertical nuclear fuel rod by dispersed fluid jet impingement. Perspectives in Science, 8, 110-112. https://doi.org/10.1016/j.pisc.2016.04.010 

Choubey, G., Pandey, K. M., Sharma, D., & Debbarma, A. (2016). Computational simulation of multi-strut central lobed injection of hydrogen in a scramjet combustor. Perspectives in Science, 8, 222-224. https://doi.org/10.1016/j.pisc.2016.04.032 

Debbarma, A., & Pandey, K. M. (2016). CFD study of rewetting nuclear fuel rod bundle by zig-zag jet impingement. Indian Journal of Science and Technology, 9(16), 1-7. https://dx.doi.org/10.17485/ijst/2016/v9i16/92572

Debbarma, A, & Pandey, KM (2013). "Numerical Analysis of the Flow and Heat Transfer in the Sub-Channel of Supercritical Water Reactor." Proceedings of the ASME 2013 International Mechanical Engineering Congress and Exposition. Volume 8A: Heat Transfer and Thermal Engineering. San Diego, California, USA. November 15–21, 2013. V08AT09A048. ASME. https://doi.org/10.1115/IMECE2013-66029